Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2016
Diatronik Support Dash mileage correction via OBD2
Diatronik Support Airbag Calculator via USB
Diatronik have many more function like OBDII Diag, IMMO Tool, G-Prog in develop, will add later.
BMW B800 Airbag Light Reset tool Feature
1, Display fault codes.
2. Turn off the SRS light on your BMW dashboard.
3, Full BMW car coverage: from 1994 to 2003.
4, Free shipping no tax trouble.
Airbag Reseter works without additional computer and trough car OBD II connector can erase airbag sensor "crash data" or only fault memory.
Very simple instruction for use: connect this tool to car's OBD II connector.
Right red button is for airbag "crash data" erase.
Left yellow button is for erase airbag "fault memory" or "errors".
MB EIS Repair Tool used to repair Benz key failure that intermittently or permanently can not turn ignition on, including the key twist fixed, the key data code hopping, remote control can not be used, the ignition lock (EIS) can not diagnose and so on.
CG100-airbag tool exclusively designed to read Tricore MCU’s over CAN-bus.Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators.Edit CRC Eeprom.
W211/R230 ABS/SBC TOOL (Repair Code C249F) for Mercedes Ben z cars have W211 and R230 with ABS SBC system.
New CG100 Airbag Restore Devices includes all functions of XC236x FLASH Programmer and Renesas Repair function.
Range Rover P38a EAS Reset Tool Used to Clear and Read the Range Rover P38a EAS and Stored faults. Range Rover P38a EAS Reset Tool is easy to use, every Range Rover P38 owner can have this device in hand , reset the EAS by yourself.
Airbag Universal Repair 2016 Version is the best software aimed at repair of an airbag ECU, accompanied by a graphical interface. It's very simple and intuitive.
Iprog Pro is a powerful tool for car repair on airbag, dashboard, car radio, ecu, eeprom, immo, mcu and special functions
1.Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2018
2.Diatronik Support Dash mileage correction via OBD2
3.Diatronik Support Airbag Calculator via USB
4.Diatronik have many more function like OBDII Diag, IMMO Tool and Gprog functions.
Toyota vehicles prior to 2009 are equipped with a Tire Pressure Warming Reset that can be used for initialization. When the bottom is pushed and held for more than 3 seconds, the vehicles receivers are open and looking for the currently stored TPMS IDS.
What if there is a missing or broken sensor?
What if there are new sensors on the vehicle that haven’t yet been programmed?
This will cause these vehicles to become stuck in a loop, searching for TPMS IDS that are no longer there.
N2 USA has developed the Toyota Loop Reset tool to hands this issue.